Wizard 310 Nasal CPAP Mask with Headgear by Apex Medical

Wizard 310 Nasal CPAP Mask with Headgear by Apex Medical
Brand: Apex Medical Ltd
Product Code: AP310NM
Availability: In Stock




* Plus £0.00 deposit.

Available Options


* SIZE of your CPAP Mask:


Qty: Add to Cart

The Apex Wizard 310 is a traditionally shaped nasal mask for CPAP therapy. The Wizard 310 uses a triangular cushion that sits near the bridge of the nose and above the top lip.
The Wizard 310 is unusual thanks to a flexible, ergonomic frame that wraps flat across the forehead, eliminating the silicone forehead pad usually found in a mask of this style.
The mask only has three parts, and they come together and apart with just one snap and one click.
The snap on cushion is engineered with a multi-point pressure redistribution system to provide a quick and stable seal.
Angled air vents are built into the cushion to keep exhaled airflow quiet and directed away from the user and sleeping partners.

Features

  • Forehead support without a silicone pad
  • Contour fitting cushion
  • Secure connections with simple set up and removal

Bendable frame
The Wizard 310 at first glance looks like the typical nasal CPAP mask design, with a stabilizing bar on the frame that comes up between the eyes. Most mask designs of this style end in a forehead pad made of silicone or foam, but the Wizard 310 uses a soft and flexible mask frame that lays flat across the forehead. The ergonomic frame bends with movement and contours to the face. Lightweight and flexible, the frame combines with breathable headgear to provide stability and comfort with a soft forehead support structure. The pad free design removes concerns about red marks in the center of the forehead and simplifies disassembly for cleaning.

Pressure Redistribution Design
Smartly engineered with a multi-point pressure redistribution system, the nasal cushion gives a soft yet stable fit with minimal leak. The cushion is contoured so that it is thinner on the bridge of the nose for softer support against that delicate area. Compact side supports provide stability and seal. 45 degree angled exhalation ports are built into the cushion itself to provide quiet airflow out and away from the CPAP user and the bed partner.

Set Up is a Snap
The Wizard 310 only has three parts: the flexible frame, the breathable headgear, and the nasal cushion. Foolproof assembly is a snap. A triangle marking on the cushion points the way to a quick connection with the frame. The headgear slips on quickly over the head and attaches to the frame with only a final one clip connection. Soft connection tubing extending from the frame provides both a quick release connection and more flexibility for movement during sleep.

This mask is for most nasal CPAP mask users, but may benefit you if:

  • You like the stable performance of a traditional nasal mask with forehead support.
  • You value comfort, quiet, and ease of use.
  • You primarily breathe through your nose.

Sizing and Fitting
The Apex Wizard 310 is available with a small, medium, or large nasal cushion. Selecting the right size mask and headgear is critical to your comfort and satisfaction with any sleep apnea mask. The best size cushion for you rests around your nose and not on it. A sizing guide is available here to help you select the best size for your face.

Select a cushion size that sits on your upper lip without occluding your mouth or your nostrils. The tip of the triangular cushion should be just above the tip of the nose and not near or in your eyes.

The flat forehead strap on the flexible frame and headgear should cross the middle of the forehead. The bottom of the headgear should sit below your ears and across the back of the head just above the neck. The top forehead strap should sit midway between the ears and the top of the head.

Over the Head Fitting

  • Clip the headgear to the frame on one side.
  • Hold the cushion near your nose or forehead with one hand.
  • Lift the headgear over your head with the other hand.
  • Position the cushion over the nose as the headgear goes in place.
  • Clip the headgear to the frame on the open side.
  • Adjust the headgear straps as needed for a gentle, stable mask fit.

Resolving Leaks

  • Many leaks resolve by reseating the mask. Gently lift the mask off your face then lower it back down over your nose.
  • Overtightening can exacerbate leaks, cause pain, skin irritation, and red marks.
  • Consider changing sizes of the cushions or headgear if you need to tighten the headgear excessively.

Cleaning and Maintenance

  • The headgear should be cleaned weekly and the cushion and frame should be cleaned after each use.

Cleaning Process

  • Remove the headgear and cushion from the frame. The buckles may stay attached to the headgear.
  • Wash in warm soapy water using a mild soap or diluted dish-washing detergent.
  • Remove all facial oils from the cushion.
  • Use a soft bristle brush to clean the air vents on the cushion.
  • Rinse in fresh water.

All parts should be air dried out of direct sunlight before reassembling the mask.

Important: Do not clean with products containing alcohol, scents, antibacterial agents, antiseptics, bleach, chlorine, or moisturizers.

Component Materials

  • Frame: Thermoplastic ester elastomer (TPEE)
  • Cushion: Silicone mounted on polycarbonate
  • Elbow Diaphragm: Silicone rubber
  • Elbow: Polycarbonate
  • Port Cap: Silicone rubber
  • Swivel Hose: Polycarbonate
  • Headgear Strap: Polyurethane Foam/Nylon/Neoprene
  • Headgear Clips: Acetol 
  • Tubing Connector: Polypropylene
  • Quick Release Button: Acetal

Operating Conditions

  • 4-30 cmH20
Additional Information
INCLUDED WITH THIS PURCHASE (1) Wizard 310 Nasal Mask Frame (1) Wizard 310 Nasal Cushion (selected size) (1) Gray Headgear Strap with 2 Headgear Clips (1) Elbow Connector
There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: