Wizard 320 Full Face CPAP Mask with Headgear by Apex Medical

Wizard 320 Full Face CPAP Mask with Headgear by Apex Medical
Brand: Apex Medical Ltd
Product Code: AP320FFM
Availability: Pre-Order (7-14 days)

* Plus £0.00 deposit.

Available Options

* SIZE of your CPAP Mask:

Qty: Add to Cart

The Wizard 320 from Apex Medical is a full face mask with a traditional triangular-shaped cushion that sits on the bridge of the nose and rests below the lower lip.
A flexible, ergonomic frame with flat, soft forehead support sets the Wizard 320 apart from many other full face masks.
The frame combines with breathable headgear and a contoured cushion engineered to redistribute pressure to create a full face mask that is both comfortable and stable.
Air vents angled at 45-degrees are built into the cushion to quiet the mask and direct airflow away from you and your partner.
A safety valve built into the mask opens to allow outside air entry should air flow stop from the CPAP machine.


  • Contour fitting cushion
  • Flexible frame
  • Rapid assembly and connection

Soft and flexible fit
The Wizard 320 has a flexible frame that rests flat against the forehead. Most full face masks employ a silicone or gel forehead pad to stabilize the mask. By removing the forehead pad, the Wizard 320 eliminates a typical spot for red marks.
The ergonomic frame flexes with facial movements and conforms to facial contours. Soft, breathable headgear rests flat against the back of the head while side straps run above and below the ears.
The headgear works in tandem with the frame to keep the mask in place while you enjoy a comfortable and relaxed night of sound sleep.

Quiet, Safe, and Elegant
Elegantly constructed with only three primary parts (cushion, headgear, and frame), the Wizard 320 dispels the notion that full face masks need to be bulky and complicated. Advanced air-guiding vents dot the face cushion, reducing noise and sending exhaled air flow away from the CPAP user and the bed partner. The cushion snaps readily into the flexible frame, so re-assembly after daily cleaning is effortless. A quick-release connection on the front of the mask allows rapid disconnection without removing the headgear. A valve opens to entrain ambient air should the CPAP or BIPAP machine unexpectedly stop working, so you can feel safe despite having both the nose and mouth covered.

Sizing and Fitting
The Wizard 320 full face mask is available with either a small, medium or large cushion. The flexible frame is one size fits most. A sizing guide for the Wizard 320 is available here.

An appropriately sized full face mask should rest on or above the bridge of your nose and sit under your lower lip. The cushion should not touch the eyes, lips, or corners of the mouth.
It should rest at the sides of the nose, but not on the nose except at the nasal bridge.

The flat forehead strap on the flexible frame and headgear should cross the middle of the forehead. The bottom of the headgear should sit below your ears and across the back of the head just above the neck.
The top forehead strap should sit midway between the ears and the top of the head.


  • Clip the headgear to the frame on one side.
  • Hold the cushion against the lower lip and roll it gently up over the nose.
  • Lift the headgear over your head with the other hand.
  • Clip the headgear to the frame on the open side.
  • Adjust the headgear straps as needed for a gentle, stable mask fit.

Resolving Leaks

  • Gently lift the mask away from your face with the headgear in place, then lower it back down to smooth out wrinkles in the cushion.
  • Gently tighten the lower straps to resolve leaks near the mouth.
  • Gently tighten the upper straps to resolve leaks around the nose.
  • Wash the frame and cushion. Facial oils, dirt, and makeup can prevent a stable fit.
  • Consider changing sizes of the cushions or headgear if you need to tighten the headgear excessively.

Cleaning and Maintenance

  • Daily: Cushion and Frame with Connecting Tube
  • Weekly: Headgear

Cleaning Process

  • Remove the headgear and cushion from the frame.
  • Wash in warm soapy water using a mild soap or diluted dishwashing detergent.
  • Use a soft bristle brush to clean the air vents on the cushion.
  • Rinse in fresh water. Air dry out of direct sunlight.
  • Important: Do not clean with products containing alcohol, scents, antibacterial agents, antiseptics, bleach, chlorine, or moisturizers.

Component Materials

  • Frame: Thermoplastic ester elastomer (TPEE)
  • Cushion: Silicone mounted on polycarbonate
  • Elbow Diaphragm: Silicone rubber
  • Elbow: Polycarbonate
  • Port cap: Silicone rubber
  • Swivel Hose: Polycarbonate
  • Headgear Strap: Polyurethane Foam/Nylon/Neoprene
  • Headgear Clips: Acetol
  • Tubing Connector: Polypropylene
  • Quick-Release Button: Acetal
Additional Information
INCLUDED WITH THIS PURCHASE (1) Wizard 320 Full Face Mask Frame (1) Wizard 320 Full Face Cushion (selected size) (1) Gray Headgear Strap with 2 Headgear Clips (1) Soft Connection Tubing
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: